background image

EN

11

English

Chapter 5 - Using more of your TV

Setting up your favourite channels

You can create a list of your favourite TV channels.

1. 

Press 

LIST

.

2. 

Press the red button to enter 

Select channel list

press 

/

 to select a list and press 

OK

 to enter.

3. 

Press 

/

/

/

 to scroll through the channel list 

and press the green button to add the selected 

channel to your favourite list.

4. 

Repeat this procedure to set up other favourite 

channels.

5. 

Press the red button to enter 

Select channel list

select 

Favorites

 and press 

OK

 to enter.

6. 

Press 

/

/

/

 to select a channel, press 

OK

 

to watch it or press the green button to remove it 

from your favourite list.

7. 

Press 

LIST

 or 

EXIT

 to exit.

Energy saving

1. 

Press 

MENU

 or 

OPTION

 on the remote control, 

select 

Settings > Picture > Auto dimming > 

Energy saving

 and press 

OK/►

 to enter.

2. 

Press 

/

 to select a desired power saving mode 

and press 

OK

 to confirm. 

3. 

Press 

EXIT

 or 

MENU

 to close the menu.

Local dimming

(* available only in selected models)

Your TV is equipped with local dimming technology 

which increases local contrast and decreases power 

consumption.
Follow the steps below to access the local dimming.

1. 

Press 

MENU

 or 

OPTION

 on the remote control, 

select 

Settings > Picture > Auto dimming > 

Local dimming

 and press 

OK/►

 to enter.

2. 

Press 

/

 to select 

On

 or 

Off

 and press 

OK

 to 

confirm.

3. 

Press 

EXIT

 or 

MENU

 to close the menu.

Viewing TV using the 3D function

(* not available for some models)

WARNING:

•  Some viewers may experience discomfort while 

viewing 3D TV such as dizziness, nausea and 

headaches. If you experience any such symptom, stop 

viewing 3D TV, remove your 3D glasses and rest.

• Watching 3D videos too closely or for a long period 

of time may harm your eyesight.

• A responsible adult should frequently check on 

children who are using the 3D function.

• Do not use the 3D glasses for any other purpose 

than viewing 3D videos on a 3D TV.

• Do not use the 3D function or 3D glasses while 

walking or moving around, otherwise this may result 

in injuries due to running into objects, tripping, and/

or falling.

1. 

Press 

MENU

 or 

OPTION

 on the remote control, 

select 

Settings > Picture > 3D navigation

, and 

press 

OK/►

 to enter. Press 

/

 to select 

Manual

 

and press 

OK

 to confirm.

2. 

Press 

/

 to select 

3D

 in the 

Picture 

menu and 

press 

OK/►

 to enter.

3. 

Wear the 3D glasses first, then select 

3D Mode

 

and press 

OK/►

 to enter. Press 

/

 to select the 

desired 3D input format for the playing of 3D video 

and press 

OK

 to confirm.

4. 

Press 

/

 to select other menu options:

 

-

3D-to-2D: 

Select 

On

 to display 3D image in 2D 

mode (no 3D effect). 

 

-

L-R switch: 

Select 

On

 or 

Off

 to adjust the 3D 

video between the left and right eyes for better 

3D viewing.

 

-

Depth of field: 

This option is available only in 

3D mode. You can adjust it to achieve a good 3D 

effect with the image.

5. 

Press 

EXIT

 or 

MENU

 to close the menu.

Notes: 

 

 -

3D glasses from other manufacturers may not be 

supported.

 -

All photo functions are disabled in 3D mode.

 -

If you change to a different signal source 

or access Smart TV, the 3D mode will be 

automatically disabled.

 -

Some 3D modes may not be available depending 

on the input format of the 3D video source.

 -

Supported 3D modes:

Analogue TV, AV: 

2D-to-3D

Digital TV, CMP, HDMI, USB, Videos from the 

Internet: 

2D-to-3D

Side-by-Side

Top-and-

Bottom

Line interleave

.

 

-

3D function in USB mode: During the playback 

of a selected video from USB, press 

OPTION

 to 

display the video menu in the browser mode, then 

select 

3D mode

. For more detail information, 

refer to the above related descriptions.

SPDIF type

Connect the TV to an audio device through the 

SPDIF

 

output. To select a proper sound type for your SPDIF 

output, press 

MENU

 or 

OPTION

 on the remote 

control, select 

Settings > Sound > SPDIF type

 and 

press 

OK/

 to enter. Press 

/

 to select an option 

and press 

OK

 to confirm.

 - If you select 

Auto

, the SPDIF output format is

• Dolby Digital when the programme’s sound format 

is Dolby Digital or Dolby Digital Plus or HE-AAC.

• PCM when the programme’s sound format is 

MPEG.

 - If you select 

PCM

, the SPDIF output format is PCM, 

regardless of the programme’s sound format.

 - If you select 

Off

, this turns off the audio output from 

the audio device connected to the SPDIF output.

Summary of Contents for 50UA6406
























Reviews: