TABLE IV
10.1
Tool Pack
Left-to-right side feed Tool Pack.
Stand-alone operation (no need for host controller)
Automatic Crimping
System
Fits in most industry-standard presses with a shut height of 135.8 mm
Tooling Type
Quick change Tool Pack.
Terminal Feed
Mechanism
Electronic / stepper motor
Delay - 10 selections, ranging from: 0 to 5 seconds
Speed - 9 selections, ranging from
• 6.35 to 76.2 (mm/sec)
• 0.25 to 3.0 (in/sec)
Position Offset from:
• ±12.7 mm in ±0.024 mm increments
• ±0.50” in ±0.01 increments
Crimp Heights
(Both Conductor and
Insulator)
Range: 1.0 mm (0.039”) Max Adjustment.
Resolution: 0.015 mm (0.005”) Min. Adjustment.
Power Requirements Single Phase AC, 90 to 240 V @ 50-60 Hz
Environmental
Temperature:
• 4 to 40 degrees Celsius
• 40 to 104 degrees Fahrenheit
Humidity (non-condensing):
• 10% to 90% relative humidity
10.0
SPECIFICATIONS
TA04864 E Page 11 of 13
