thomann Tri Flood MK II, User Manual

Page: 30 / 48

Press the [MODE] button repeatedly until the top row of the display shows ‘COOLMODE’ . Now
you can use the [UP] and [DOWN] buttons to choose one of three different options for temper‐
ature monitoring:
n
‘STUDIO’ : The brightness of the LEDs is always adjusted to 70 %. As soon as the tempera‐
ture inside the unit exceeds 70 °C, the fan turns on and the brightness is further reduced.
This lets the unit cool down automatically.
n
‘REGULATE’ : The brightness of the LEDs is always set at 100 %, as long as the temperature
inside the unit is below 60 °C. At a higher temperature, the brightness is reduced. As soon
as the temperature exceeds 48 °C, the fan turns on.
n ‘POWER’ : The brightness of the LEDs is always set at 100 %, as long as the temperature
inside the unit is below 70 °C. At a higher temperature, the brightness is reduced. The fan
runs continuously.
When the display shows the desired value, press the [MODE] button to confirm the selection
and return to the parent menu. To return there without changes, wait a minute.
Press the [MODE] button repeatedly until the top row of the display shows ‘VERSION’ . In the
bottom row, the display shows the number of the installed device software.
Press the
[MODE] button, to return to the parent menu or wait a minute.
Temperature monitoring
Device version
Operation
LED floodlight
30