thomann Tri Flood MK II, User Manual

Page: 23 / 48

Press the [MODE] button repeatedly until the top row of the display shows ‘DMX ADD’ . Now
you can set the number of the first DMX channel to be used by the device (DMX address). Use
the buttons [UP] and [DOWN] to select a value between 1 and 512 (the bottom row of the dis‐
play shows ‘A001’ … ‘A512’ ).
When the display shows the desired value, press the [MODE] button to confirm the selection
and return to the parent menu. To return there without changes, wait a minute.
Make sure that the set DMX address matches the configuration of your DMX controller. The
following table shows the highest possible DMX address for the different DMX modes.
DMX mode Channels Highest possible DMX
address
1 1 512
2 2 511
3 3 510
4 5 508
DMX address
Operation
Tri Flood MK II 15×15 W RGB
23