thomann Tri Flood MK II, User Manual

Page: 25 / 48

Repeatedly press the [MODE] button until the top row of the display shows ‘SETUP’ . Now you
can use the [UP] and [DOWN] buttons to select the options for the Master mode:
n
‘MAST ON’ : Master mode is on, the unit operates as Master.
n
‘MAST OFF’ : Master mode is off.
This setting is only relevant if the unit is not controlled by DMX. The device can control con‐
nected devices of the same type, that have to be configured as Slaves.
When the display shows the desired value, press the
[MODE] button to confirm the selection
and to return to the parent menu. To return there without any changes, wait a minute.
Press the
[MODE]
button repeatedly until the top row of the display shows
‘SETUPDIM’
. Now
you can use the
[UP]
and
[DOWN]
buttons to adjust the brightness in a range of 0 % to 100 %.
This setting overrides the brightness setting that can be controlled by DMX.
When the display shows the desired value, press the
[MODE] button to confirm the selection
and return to the parent menu. To return there without changes, wait a minute.
Master mode
Manual dimmer
Operation
Tri Flood MK II 15×15 W RGB
25