7
Operation
7.1
Starting up the device
Connect the unit to the power grid to start the operation. After a few seconds the display
shows a running reset. Then the unit is ready for use.
7.2
Main menu
Press the
[MODE]
button to activate the main menu and select an operating mode. Use the
buttons
[UP]
and
[DOWN]
to change the respectively shown value. When the display shows the
desired value, press the
[MODE]
button.
If you don't press any button for about one minute, the unit returns to the previously selected
mode. The set values are retained even when the device is disconnected from the mains
power supply.
Operation
LED floodlight
22
Summary of Contents for Tri Flood MK II
