thomann Stairville Tri Flat PAR Profile 18x3W RGB User Manual Download Page 50

Page: 50 / 56

Cleaning

Clean the exterior of accessible optical lenses periodically to optimise light output. The fre‐

quency of cleaning depends on the operating environment: wet, smoky or particularly dirty

surroundings can cause more accumulation of dirt on the optics of the device.

Clean with a soft cloth using normal glass cleaning products.

Always dry the parts carefully.

The fan grids of the device must be cleaned on a regular basis to remove dust and dirt. Before

cleaning, switch off the device and disconnect AC-powered devices from the mains. Use a lint-

free damp cloth for cleaning. Never use solvents or alcohol for cleaning.

Optical lenses

Fan grids

Cleaning

LED PAR

Summary of Contents for Stairville Tri Flat PAR Profile 18x3W RGB

























































Search results

Summary of Contents for Stairville Tri Flat PAR Profile 18x3W RGB

Reviews:

Related manuals for Stairville Tri Flat PAR Profile 18x3W RGB

Brands by name

Popular brands

thomann Stairville Tri Flat PAR Profile 18x3W RGB, User Manual

Search results

Summary of Contents for Stairville Tri Flat PAR Profile 18x3W RGB

Reviews:

Related manuals for Stairville Tri Flat PAR Profile 18x3W RGB

Brands by name

Popular brands