thomann Stairville Tri Flat PAR Profile 18x3W RGB, User Manual

Page: 34 / 56

This setting is only relevant when the unit is DMX-controlled.
Press
[Mode] repeatedly until the display shows ‘d.xxx’ .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (display shows ‘d.001’ … ‘d.512’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
3-channel 510
5-channel 508
7-channel 506
Press [Setup] . Now use [Up] and [Down] to select one of the following DMX operating modes:
n
‘3-ch’ (three channels)
n
‘5-ch’ (five channels)
n
‘7-ch’ (seven channels)
DMX-Modus
Operating
LED PAR
34