7
Operating
7.1
Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.2
Operating the device directly
Press
[Mode]
to activate the main menu and select an operating mode. Use
[Setup]
to select
further options. Use
[Up]
and
[Down]
to change the respectively displayed value. When the dis‐
play shows the desired value, press
[Mode]
.
If you don't press any button for about ten seconds the display turns off. It will be reactivated
to display the previously shown menu by pressing any button.
The set values are retained even when the device is disconnected from the mains power
supply.
Operating
Tri Flat PAR Profile 5×3W RGB
31
Summary of Contents for Stairville Tri Flat PAR Profile 18x3W RGB
