thomann STAIRVILLE LED Commander 16/2, User Manual

Page: 31 / 48

1.
Keep the [PROGRAM
½
RECORD] button pressed for three seconds to switch to Program/
Record mode.
2. Use the [CHASE] buttons to select the required sequence. To do this, switch between the
two memory banks using the toggle button if need be.
ð
The associated CHASE LED lights up.
3. Use the [FIXTURE] buttons to select the channel you wish to program.
4. Use the Flash controllers 1 to 8 to set the required values.
5.
Press the [PROGRAM
½
RECORD] button to save the new values.
ð
All of the device LEDs flash briefly and the following values appear on the display:
6.
Repeat steps 2 to 5 to add further program steps.
7.
Hold the [PROGRAM
½
RECORD] button down for three seconds to exit recording mode.
Programming chaser sequences
Operation
LED Commander 16/2
31