thomann STAIRVILLE LED Commander 16/2, User Manual

Page: 43 / 48

Proceed as follows, to bring the firmware of the device up to date.
Therefore you need a completely empty FAT32 formatted USB drive.
1.
Create a folder in the root directory of the USB drive named "led-commander16-2".
2. Copy the file containing the current firmware version to the "led-commander16-2"
folder.
3. Connect your USB drive containing the current firmware version to the device's USB
port.
4.
Switch off the device.
5.
Hold the [PROGRAM | RECORD] , [MODE] and buttons down and switch the device on.
ð
After two seconds, the display shows ‘Press any button | Update firmware’ .
6.
Press any button to start the firmware update.
7.
Once installation is complete, the display shows ‘Update succeeded | Please reboot’ .
8. Then switch the device off and back on again after a few seconds.
ð
The unit will now start with the updated firmware.
Updating the firmware
Operation
LED Commander 16/2
43