thomann STAIRVILLE LED Commander 16/2, User Manual

Page: 26 / 48

During assignment, one or more DMX channels (1 to 512) can be assigned to a fixture's specific
fader. As an example, DMX channel 3, 13 and 23 can be assigned to the second channel fader
of fixture 2.
1.
Hold the [PATCH
½
CLEAR] button down for three seconds.
2. Press the [FIXTURE] button (1 to 16) to select the required FIXTURE channel.
3.
Select the required channel range with the [SPEED] slider.
4.
Select the required DMX channel with the [FADE] slider.
5. Press the Flash button of the function you wish to assign.
6. Repeat steps 2 to 5 in order to assign functions to the remaining sliders.
7.
Hold the [PATCH
½
CLEAR] button down for three seconds to exit this mode.
Example: If the RED function (Flash button 2) is stored to DMX channel 21, the display shows
the following values:
Assigning device channels
Operation
DMX controller
26