thomann Stairville LED-Commander 16/2, User Manual

Page: 18 / 28

1.
Switch off the device.
2.
Hold [PROGRAM
½
RECORD] , [DIMMER] and [PATCH
½
CLEAR] down simultane‐
ously and switch the device back on.
ð
After two seconds, the following message appears on the display:
3.
Press the Flash button of the function you wish to rename.
4. On the display, the name can now be changed using the joystick (move to the
right/left moves the cursor, move up/down changes the relevant letters of the
alphabet).
5.
Repeat steps 3 and 4 to rename any other Flash functions.
6.
Confirm the new designation(s) with [PROGRAM
½
RECORD] .
7. Switch the device off and back on again to work with the new settings.
The MIDI function allows you to connect two DMX controllers or to control the con‐
troller via a MIDI keyboard.
1.
Hold [MIDI
½
IN SET] down for three seconds to switch to MIDI mode.
2.
Use and to select a MIDI channel (1 to 16).
3.
Hold [MIDI
½
IN SET] down for three seconds to exit MIDI mode.
MIDI value Function Explanation
0-15 SCENE1-16 Switch scenes 1-16 on/off
16-31 CHASE1-16 Switch chaser sequences 1-16
on/off
32 MANUAL Manual sequence control
33 MUSIC Music-controlled sequence
34 AUTO Automatic sequence control
35 AUX1 Switch AUX1 on/off
36 AUX2 Switch AUX2 on/off
37 Manual sequence control
38 Manual sequence control
39 TAP Automatic sequence control
Renaming Flash functions
MIDI functions
Operating
DMX controller
18