1.
Hold
[PROGRAM
½
RECORD]
down for three seconds to switch to Program/
Record mode.
2.
Use
[CHASE]
to select the sequence you wish to delete a program step from. To
do this, switch between the two memory banks using the toggle button if
need be.
3.
Press
[MIDI
½
IN SET]
and then use and to select the step number you wish
to delete.
4.
Press
[TAP
½
DEL]
to delete the program step.
ð
All LEDs flash three times.
5.
Hold
[PROGRAM
½
RECORD]
down for three seconds to exit recording mode.
1.
De-select all active FIXTURE, SCENE and CHASE channels (all blue LEDs off).
2.
Hold
[PROGRAM
½
RECORD]
down for three seconds to switch to Program/
Record mode.
3.
Switch between the two memory banks ‘CHASE’ and ‘SCENE’ using the toggle
button if need be.
4.
Press
[TAP
½
DEL]
and simultaneously the chase button of the sequence or
scene you wish to delete.
Wait a few seconds until the LEDs have gone out.
5.
Hold
[PROGRAM
½
RECORD]
down for three seconds to exit recording mode.
1.
Hold
[PATCH
½
CLEAR]
down for three seconds to switch to Program/Record
mode.
2.
Use
[FADE]
and
[SPEED]
to select the DMX channel you wish to assign.
3.
Press
[AUX1]
or
[AUX2]
assign the DMX channel to the corresponding AUX
channel.
4.
Repeat steps 2 and 3 to assign as many other DMX channels as you wish.
5.
Hold
[PATCH
½
CLEAR]
down for three seconds to exit recording mode.
As soon as DMX channels are assigned to an [AUX] button, the value of the
assigned channels is set to 255 whenever this button is activated.
Deleting a program step
Deleting chaser sequences or a scene
Assigning DMX channels to AUX chan‐
nels
Operating
LED-Commander 16/2
17
