manualshive.com logo in svg

thomann STAIRVILLE Beam Moving Head B2R, User Manual

Share
Download
thomann STAIRVILLE Beam Moving Head B2R User Manual Download Page 5

1.3  Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words

that are used in this manual.

Signal word

Meaning

DANGER!

This combination of symbol and signal word indicates

an immediate dangerous situation that will result in

death or serious injury if it is not avoided.

WARNING!

This combination of symbol and signal word indicates

a possible dangerous situation that can result in death

or serious injury if it is not avoided.

CAUTION!

This combination of symbol and signal word indicates

a possible dangerous situation that can result in minor

injury if it is not avoided.

NOTICE!

This combination of symbol and signal word indicates

a possible dangerous situation that can result in mate‐

rial and environmental damage if it is not avoided.

Warning signs

Type of danger

Warning – high-voltage.

Warning – hot surface.

Warning – dangerous optical radiation.

Warning – suspended load.

Warning – toxic substances.

Warning – danger zone.

General notes

 

 

Beam Moving Head B2R

5

Summary of Contents for STAIRVILLE Beam Moving Head B2R





































Reviews:

No comments

Brands by name

Popular brands

Load more brands