NOTICE!
Fire and overheating hazard
The distance between the light source and flammable materials must be
greater than 12 m. The distance to non-inflammable materials must be
greater than 2 m.
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Possible damage caused by movements of the device
Always ensure that enough space is free around the device for the
movements of the head (pan, tilt).
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not
use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers
or amplifiers.
The quick lock openings on the housing bottom are used for secure attachment of
the supplied Omega brackets. Here you can connect flight adapters (such as the
included C-hooks). The included safety rope must pass through the notches on the
bottom case as shown in the following figure.
1 Quick lock openings for Omega brackets
2 Openings for safety cable
Mounting options
Installation
Beam Moving Head B2R
11
