4.
Align the head of the unit so that the metal brackets of the illuminant are
aligned as shown in the figure.
5.
Carefully press down on the illuminant from above, so that the retainers
slightly bend back. Tilt the illuminant slightly towards you to release it from the
bracket.
6.
Carefully guide the illuminant upwards out of the bracket. Unscrew the power
supply cables from the old illuminant and connect the power cables to the
new illuminant. When installing the new illuminant, make sure that the sensi‐
tive front part is not touching the housing.
7.
Re-insert the illuminant into the retainers. Be sure to keep the illuminant at the
corners under the bracket.
Maintenance
moving head
26
