manualshive.com logo in svg

thomann STAIRVILLE Beam Moving Head B2R, User Manual

Share
Download
thomann STAIRVILLE Beam Moving Head B2R User Manual Download Page 15

7 

Operating

7.1  Starting the device

CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce

very bright light. This is also valid immediately after you turn on the

device, when the device operates in automatic mode or under remote

control and when you turn off a DMX controller that is connected to the

device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure

that nobody stays close to the device. If work has to be performed in the

area of movement or in the near vicinity of the device, it must remain

turned off.

Connect the device to the power supply to start operation. After a few seconds, the

fans start to work, the head moves to the home positions for rotation (pan) and incli‐

nation (tilt). After a few more seconds, the device operates in the last set mode. The

last set DMX address appears in the display. About one minute after turning on the

illuminant lights with full brightness.

7.2  Operating modes

Press 

[MENU]

 to open the main menu. Use 

[UP]

 and 

[DOWN]

 to select the menu item

‘DMX Mode’

 and confirm with 

[ENTER]

 to open the submenu 

‘Address’

.

Use 

[UP]

 and 

[DOWN]

 to set a DMX address between 

‘1’

 … 

‘500’

 (highest possible

DMX address for 13-channel operation).
Confirm with 

[ENTER]

 to save your setting. Press 

[MENU]

 to return to the previous

menu level.

Press 

[MENU]

 to open the main menu. Use 

[UP]

 and 

[DOWN]

 to select the menu item

‘AutoMode’

and confirm with 

[ENTER]

.

Use 

[UP]

 and 

[DOWN]

 to select the menu item 

‘Program’

 and confirm with 

[ENTER]

.

Now use 

[UP]

 and 

[DOWN]

 to select one of the available programmes 

‘1’

 … 

‘9’

 and

confirm with 

[ENTER]

.

Use 

[UP]

 and 

[DOWN]

 to select the menu item 

‘Speed’

 and confirm with 

[ENTER]

. Now

use 

[UP]

 and 

[DOWN]

 to set the programme sequence speed in a range from

‘1’

 … 

‘9’

.

Confirm with 

[ENTER]

 to save your setting. Press 

[MENU]

 to return to the previous

menu level.

DMX mode, configure the DMX

address

Operating mode AUTO

Operating

 

 

Beam Moving Head B2R

15

Summary of Contents for STAIRVILLE Beam Moving Head B2R





































Reviews:

No comments

Brands by name

Popular brands

Load more brands