n
Recording with presets
In this recording mode, you can set different recording parameters.
1.
To activate the recording mode, press the button.
ð
The
[PHRASE]
button lights up and the button starts flashing to indicate that the
device is ready for recording.
2.
Press the
[SETUP]
button to open the setup menu for the recording function.
3.
Use the
[+ | –]
rotary knob to set the available parameters one after the other (see table
below). Always press the
[ENTER]
button to confirm your changes and to move to the
next parameter (alternatively, you can skip parameters by means of the
[+ | –]
rotary
knob). Once you are done with your settings, press the
[EXIT]
button to exit the setup
menu.
4.
To start recording, press the button again and play your loop.
5.
To stop recording, press the button.
6.
Press the
[EXIT]
button to save the loop.
ð
‘SavePhrase’
appears on the display.
7.
Use the
[+ | –]
rotary knob to select a loop number (01 to 30) for saving your recording
and confirm your selection by pressing
[ENTER]
.
Device functions
DP-2000
27
