The DP-2000 is equipped with a digital signal processor which controls three effects (see
Ä
Chapter 8.2 ‘Effect list’ on page 63
). You can assign several effects to each single kit. The
effects always affect all pads and external triggers and cannot be assigned to individual pads.
Effect
Parameter, range of values
Reverb
Reverb on / off, Reverb Type 1…27, Reverb Level 1…127
Chorus
Chorus on / off, Chorus Type 1…27, Chorus Level 1…127
Delay
Delay on / off, Delay Type 1 / 2 / 3 / User, Delay Level 0…127
To adjust the effects, press the
[SETUP]
button, select the
‘Kit Edit’
option by means of the
[+ | –]
rotary knob and confirm by pressing
[ENTER]
. Use the
[+ | –]
rotary knob to select the
‘Global’
option and confirm by pressing
[ENTER]
. Subsequently you can make the desired set‐
tings as follows:
1.
Confirm the selection of the displayed parameter by pressing
[ENTER]
.
2.
Use the
[+ | –]
rotary knob to set the desired value.
3.
Confirm by pressing
[ENTER]
.
ð
The next parameter appears on the display, and you can proceed to make the next
setting.
Effects
Device functions
DP-2000
23