thomann fungeneration PicoWash 40Z Pixel Quad User Manual Download Page 62

Page: 62 / 68

Symptom

Remedy

The unit does not work, no light,

the fan does not run

Check the mains connection and the main fuse.

No response to the DMX con‐

troller

1. Check the DMX connectors and cables for proper con‐

nection.

2. Check the address settings and the DMX polarity.

3. Try using another DMX controller.

4. Check to see if the DMX cables run near or alongside

to high voltage cables that may cause damage or inter‐

ference to DMX interface circuits.

If the procedures recommended above do not succeed, please contact our Service Center. You

can find the contact information at

www.thomann.de

Troubleshooting

moving head

Summary of Contents for fungeneration PicoWash 40Z Pixel Quad





































































Search results

Summary of Contents for fungeneration PicoWash 40Z Pixel Quad

Reviews:

Related manuals for fungeneration PicoWash 40Z Pixel Quad

Brands by name

Popular brands

thomann fungeneration PicoWash 40Z Pixel Quad, User Manual

Search results

Summary of Contents for fungeneration PicoWash 40Z Pixel Quad

Reviews:

Related manuals for fungeneration PicoWash 40Z Pixel Quad

Brands by name

Popular brands