thomann fungeneration PicoWash 40Z Pixel Quad User Manual Download

Page: 14 / 68

CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright

light. This is also valid immediately after you turn on the device, when the device

operates in automatic mode or under remote control and when you turn off a

DMX controller that is connected to the device. Persons staying near the device

could be injured or frightened.
Before you turn on the device and during the operation, always ensure that

nobody stays close to the device. If work has to be performed in the area of move‐

ment or in the near vicinity of the device, it must remain turned off.

NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat

source. Keep the device away from naked flames.

Safety instructions

moving head

Summary of Contents for fungeneration PicoWash 40Z Pixel Quad





































































Search results

Summary of Contents for fungeneration PicoWash 40Z Pixel Quad

Reviews:

Related manuals for fungeneration PicoWash 40Z Pixel Quad

Brands by name

Popular brands

thomann fungeneration PicoWash 40Z Pixel Quad, User Manual

Search results

Summary of Contents for fungeneration PicoWash 40Z Pixel Quad

Reviews:

Related manuals for fungeneration PicoWash 40Z Pixel Quad

Brands by name

Popular brands