2.1
MOUNTING
HANGING
UPRIGHT
The fixture can be mounted in an upright
or sitting position using the supporting
brackets.
The fixture can be mounted in a hanging
position using the supporting bracket.
The bracket should be secured to the
mounting truss or structure using a standard
mounting clamp. Please note
that when hanging the unit a safety cable
should also be used.
@ 220V: 10 units may be connected in series
@120V: 5 units may be connected in series
The LED MODULE can be mounted at any angle and in any
position. It is possible to further adjust the angle of the LED
MODULE using the two adjustment knobs located on the side of
the fixture.
2.2
POWER CONNECTIONS
5
2 INSTALLATION
Note:
1. As this fixture's DMX signal cable connection is Parallel connection, so if
over 32 units to be connected, then a DMX signal amplifier is needed.
2. If the signal cable is over 60m between the DMX512 controller and
fixture or beween two fixtures, then a DMX signal amplifier is needed as
well.
2
INSTALLATION
16
4 USING A DMX512 CONTROLLER
ID21
ID22
210
211
11
ID20
200
209
ID19
190
199
ID18
180
189
ID14
ID15
ID16
ID17
140
149
150
159
160
169
170
179
ID65
ID66
254
255
ID8
ID9
ID10
ID11
ID12
ID13
80
89
90
99
100
109
110
119
120
129
130
139
CHANNEL
FUNCTION
VALUE
ID6
ID7
60
69
70
79
Arc.1
BLUE
1
2
0
255
CHANNEL
FUNCTION
VALUE
3
0
255
0
255
GREEN
RED
2010.1.15
2010.1.15
Summary of Contents for expolite tourled pro
Page 1: ......
