thomann expolite tourled pro, User Manual

Page: 11 / 12

3.2 MENU
3 DISPLAY PANEL OPERATION 9
PR.01
PR.02
PR.10
RUN DMX
SLAV
SC.01
SC.02
SC.30
AT.01
AT.02
AT.10
AUTO
PR.01
PR.02
PR.10
D(001~512)
DMX
ID
ID(01~66)
Red
Green
Blue
White
Strobe
Time
Fade
(0~255)
(0~255)
(0~255)
(0~255)
(0~20)
(0~255)
(0~255)
SET UPLD
ID
POW
ON
OFF
NORM
HIGH
KEY ON
OFF
TOUR
Arc.1
Arc.2
Ar1.d
Ar2.s
Ar2.d
WT01
WT02
WT11
Red
Green
Blue
White
(0~255)
(0~255)
(0~255)
(0~255)
MENU
Red
Green
Blue
White
(0~255)
(0~255)
(0~255)
(0~255)
Strob (0~20)
STAT
PERS
EDIT
REST
ON
OFF
RGBW
CAL1
RGBW Red
Green
Blue
(0~255)
(0~255)
(0~255)
CAL2
HSV
Off
Dim1
Dim3
Dim2
Dim4
Dim
12 3 DISPLAY PANEL OPERATION
PR.01
PR.02
PR.10
SC.01
SC.02
SC.30
Red
Green
Blue
White
Strobe
Time
Fade
(0~255)
(0~255)
(0~255)
(0~255)
(0~20)
(0~255)
(0~255)
EDIT
MENU
3.9 EDITING CUSTOM PROGRAMS
EDIT CUSTOM
Enter the EDIT mode to edit the custom programs PR.01 to
PR.10 .
Each custom program has 30 steps that can be edited.
Each step allows the creation of a scene using RED
Red , GREEN Green , BLUE
Blue , WHITE White , STROBE Strobe , TIME Time & FADE Fade .
SET UPLD
ID
POW
ON
OFF
NORM
HIGH
REST
ON
OFF
RGBW
Off
Dim1
Dim3
Dim2
Dim4
Dim
MENU
3.10 SPECIAL SETTINGS
SETTING
Select UPLD to upload the custom programs from the current MASTER unit to
the SLAVE units.
In order to activate the upload function the password must be entered.
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will display YELLOW.
If an error occurs when uploading the MASTER and/or SLAVE units will display RED.
On successful uploading of the custom programs the MASTER and SLAVE units
will display GREEN.
In order to reset custom modes to default values select REST .
Enter ID in order to allow/disallow ID address function from the DMX512
controller.
When RGBW -- RGB TO WHITE is set to YES , on RGB = 255,255,255, the
color is perfect white as the actual RGB values are adjusted to make white. When it
is set to
NO ,on RGB = 255,255,255, the RGB values are not adjusted and the
output is most powerful. The RGB W s parameter can be adjusted in CAL2 .
Enter POW to choose the operation power mode NORM or HIGH ,
when it is normal mode, the power consumption is about 90W, while under high
mode, it is about 150W.
Enter Dim to select dimmer mode and dimmer speed. When DIMMER is set to
Off , then RGBW and MASTER DIMMER are linear. The Dim 1/2/3/4 are speed
modes of the non linear dimmer , Dim1 is the faster, while Dim4 is the slowest.
The factory default setting is Dim4 .
2010.1.15 2010.1.15