thomann CLB8, User Manual

Page: 43 / 64

A constant unicoloured pattern can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[Mode] until the display shows ‘Colr’ . Press [Setup] . The display shows the setting for one
of the primary colours (display shows ‘r.xxx’ , ‘G.xxx’ , ‘b.xxx’ or ‘U.xxx’ ). Press [Setup] to change
the colour.
Use
[Up] and [Down] to adjust the intensity of the colour:
Display Meaning
‘r.000’ … ‘r.255’ Red
‘G.000’ … ‘G.255’ Green
‘b.000’ … ‘b.255’ Blue
‘U.000’ … ‘U.255’ White
Constant unicoloured pattern
Operating
Compact LED-Bar CLB8
43