thomann CLB8, User Manual

Page: 40 / 64

This setting is only relevant when the device is controlled via DMX.
Press
[Mode] until the display shows ‘d.001’ .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (display shows ‘d.001’ … ‘d.512’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
2-channel 511
4-channel 509
18-channel 495
Press [Setup] . Now use [UP] and [DOWN] to select one of the following DMX operating modes:
n
‘2-ch’ (two channels)
n
‘4-ch’ (four channels)
n
‘18ch’ (eighteen channels)
DMX mode
Operating
LED lighting set
40