thomann CLB8, User Manual

Page: 39 / 64

Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Mode] repeatedly until the display shows ‘AUTO’ . The playback of the programmes
‘Pr02’ to ‘Pr21’ starts automatically.
To adjust the programme speed, press [Setup] . The display shows ‘SPxx’ . Use [Up] and [Down]
to select a value between ‘SP01’ (slow) and ‘SPFL’ (fast).
To adjust the strobe frequency, press [Setup] again. The display shows ‘FS00’ . Use [Up] and
[Down] to select a value between ‘FS00’ (slow) and ‘FS99’ (fast).
Operating mode ‘Automatic’
Operating
Compact LED-Bar CLB8
39