thomann CLB8, User Manual

Page: 38 / 64

A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Pr.xx’ . Now you can select one of the preprog‐
rammed automatic shows. Use [Up] and [Down] to select a value between ‘Pr.01’ and ‘Pr.21’ .
Settings for programme 01:
For
‘Pr.01’ , you can choose from 14 colours, white or blackout. Press [Setup] . Use [Up] and
[Down] to select one of the preprogrammed colours.
To adjust the strobe frequency, press [Setup] again. The display shows ‘FS00’ . Use [Up] and
[Down] to select a value between ‘FS01’ (slow) and ‘FS99’ (fast).
Settings for programmes 02 to 21:
To adjust the programme speed, press again
[Setup] . The display shows ‘SPxx’ . Use [Up] and
[Down] to select a value between ‘SP01’ (slow) and ‘SPFL’ (fast).
To adjust the strobe frequency, press [Setup] again. The display shows ‘FS00’ . Use [Up] and
[Down] to select a value between ‘FS01’ (slow) and ‘FS99’ (fast).
Operating mode ‘Preprog‐
rammed automatic show’
Operating
LED lighting set
38