T H M
C L A V I C U L A X C
E
16
LOREM
IPSUM
ASSEMBLY
BB30 / PressFit 30
For BB30, PressFit 30 bottom brackets:
The long bearing cup with internal thread is always located on the drive side.
The short bearing cup with external thread is always located on the non-drive side.
BB30 / Press-fit 30
-
Apply grease to the threads
and all contact surfaces
between the frame and the
bearing cups.
-
Insert the long bearing cup
(2)
or
(4)
as far as possible
into the drive-side of the
bottom bracket housing.
-
Screw the short bearing cup
(3)
or
(5)
by hand clockwise
into the long bearing cup.
-
Make sure that both bearing
cups are located centrally in
front of the bottom bracket
housing.
-
Use
the
THM
Bottom
bracket tool ½ “
(1)
in
conjunction with a torque
wrench to apply 40 Nm of
torque.
-
For PressFit 30 place the
seals
INFO