T H M
C L A V I C U L A X C
E
13
LOREM
IPSUM
ASSEMBLY
ASSEMBLY
General Information
If not properly executed, assembly and maintenance work could cause accidents
resulting in serious or fatal injury.
-
Do not overestimate your technical ability. All assembly and maintenance
work should be performed by a specialist workshop for bicycles. This is the
only way to ensure the work is conducted in a professional manner.
Preparing the Frame
It is mandatory for you to read and follow the safety and assembly instructions
provided by the manufacturer of your frame.
Secure your bicycle in an appropriate assembly stand.
If necessary, remove the crankset and the old
bottom bracket.
If necessary, use cleaning solvent or other similar
agents to clean the bottom bracket housing of your
frame.
Make sure that the outer faces of the bottom bracket
housing are plane, parallel, milled to the correct
dimension and free of burrs
–
page 10.
If necessary, rework the bottom bracket housing
using an appropriate milling tool (Cyclus, ParkTool®
or another similar tool).
Make sure that the threads of the bottom
bracket housing are clean, free from paint
residues and adequately tapped into the
housing.
If necessary, rework the threads with an appropriate
cutting tool (Cyclus, ParkTool® or another similar
tool).
WARNING
INFO