7-10
CKSF
7. Installation and Operation
7. Installation and Operation
7.
Installation and Operation
7. Move the table to the stroke center and mount the side cover.
Note) For a long stroke, the strip seal may sag depending on the installation direction. If that
happens, lift up a strip seal slightly with fingers so that it will not contact the side cover.
Working with 2 people is recommended if it is difficult to mount the side cover while pulling
up the strip seal.
* Take care not to pull the strip seal up too far if lifting with fingers. Lifting the strip seal up
too far while the strip seal holder is fastened may cause the strip seal to break or require
adjustment to the mounting position.
Model
Outer rail - Side cover
Housing - Side cover
Tightening torque [N·cm]
CKSF4
M2.6 x 5L
M2.6 x 5L
30
CKSF5
M2.6 x 5L
M2.6 x 5L
30
CKSF6
M2.6 x 5L
M2.6 x 10L
30
CKSF8
M2.6 x 5L
M2.6 x 10L
30
CKSF10
M2.6 x 5L
M2.6 x 10L
30
Bolt type: cross recessed head screw for precision devices (No. 0 pan-head screw type 3)
www.thk.ru
тел. +7(499) 703-39-86
