7-4
CKSF
7. Installation and Operation
7. Installation and Operation
7.
Installation and Operation
7-4
Motor mounting method
We have an intermediate flange to mount various motors onto CKSF.
The example below is the case of mounting a coupling by Miki Pulley Co., Ltd. and a servo motor
by Tamagawa Seiki Co., Ltd. onto CKSF.
1. Remove the bolt and remove the housing A cover toward the direction of arrow.
Mounting bolt
Model
Bolt size
CKSF4
M2.6 x 5L
CKSF5
M2.6 x 5L
CKSF6
M2.6 x 5L
CKSF8
M2.6 x 5L
CKSF10
M2.6 x 5L
Bolt type: cross recessed head screw for precision devices (No. 0 pan-head screw type 3)
2. Tighten the coupling onto the motor shaft.
L
Model
Motor models
Coupling models
L dimensions
[mm]
Clamping
bolt size
Tightening
torque [N·cm]
CKSF4 TS4603 (Tamagawa Seiki Co., Ltd.) SFC-020DA2-6B-8B (Miki Pulley Co., Ltd.)
15
M2.5
100 to 110
CKSF5 TS4603 (Tamagawa Seiki Co., Ltd.) SFC-020DA2-8B-8B (Miki Pulley Co., Ltd.)
14.7
M2.5
100 to 110
CKSF6 TS4607 (Tamagawa Seiki Co., Ltd.) SFC-030DA2-9B-14B (Miki Pulley Co., Ltd.)
17.5
M3
150 to 190
CKSF8 TS4609 (Tamagawa Seiki Co., Ltd.) SFC-030DA2-12B-14B (Miki Pulley Co., Ltd.)
17.7
M3
150 to 190
CKSF10 TS4614 (Tamagawa Seiki Co., Ltd.) SFC-040DA2-15B-19B (Miki Pulley Co., Ltd.)
17
M4
340 to 410
Bolt type: Hexagonal-socket-head type bolt
www.thk.ru
тел. +7(499) 703-39-86
