7-7
CKSF
7. Installation and Operation
7. Installation and Operation
7.
Installation and Operation
7-5
Method of mounting/removing side covers and fixing outer rails
[Countersunk hole specification]
1. Move the table to the stroke center.
2. Remove the bolt securing the side cover.
Note) Do not remove the strip seal.
You will need the dedicated jig and adjustments when you mount the strip seal.
Always use a dedicated jig for adjustment when mounting the strip seal. See 8-9 for
information regarding the strip seal mounting procedure.
Securing outer rail - side cover
Securing housing - side cover
z
Do not drop objects on the strip seal, or scratch, pit or dent it.
The strip seal must be replaced when it is scratched, pitted or dented as a result of a tool or other
object falling on it.
Use of the strip seal in this state may cause early breakage or other damages.
During work, take sufficient care not to damage the strip seal or other parts.
z
Make sure to wear gloves while working.
Some parts of the strip seal of this product may be sharp. Take care not to cut your hands or
fingers.
Caution
www.thk.ru
тел. +7(499) 703-39-86
