6-2
CKSF
6. Storage and Transportation
6.
Storage and Transportation
6-2
Precautions to be observed for prevention of product fault or fracture
z
Since using an adverse storage environment may cause fault, store the product in the
environment described below:
· Place where the ambient temperature range is 0 to 40°C indoors (no freezing)
· Place where the ambient humidity range is 20% to 80% RH indoors (no condensation)
· Place where the product is not exposed to water
· Place where no flammable substance exists in the vicinity
· Place where a vibration or shock does not transmit to the product
· Place where liquid containing impurities such as conductive iron dust, powder such as solid
abrasive, dust, oil mist, cutting oil, water content, salt content, organic solvent, or corrosive/
flammable gas is not generated or does not float
· A place where no direct sunlight nor radiation heat reaches
· Place where no strong electric field nor strong magnetic field develops
· Place where inspections and cleanings can be easily performed
z
This product is provided with antirust treatment and sealed before being packed.
When storing the product, enclose it in a package designated by THK and store it in
a horizontal orientation while avoiding high temperature, low temperature and high
humidity.
z
When you remove the suction port, be sure to turn off the power supply and stop the
supply voltage first, and check that fluid in the piping has come out.
z
After mounting, wiring, and pipework, pass fluid or connect power supply, and perform
an appropriate function test and leak test. If you find any leaks or the devices not
functioning properly, do not use the product and make sure that the parts are mounted
correctly, it may lose the cleaning performance.
z
Do not apply an excessive load on the package, otherwise, it may cause fault or fracture.
www.thk.ru
тел. +7(499) 703-39-86
