9x0 Series Series
Page 24
For instance, if the custom parameter is set to “action=1&group=2”, and the HTTP server name is
“http://192.168.0.1/admin.php”, the notification will be sent to the HTTP server as
“http://192.168.0.1/admin.php? action=1&group=2” when an alarm is triggered.
Record Video Clip
Check this option and select a video recording storage type; SD Card or NAS (Network-Attached Storage). The
alarm-triggered recording will be saved to the SD card or the NAS.
The pre-trigger buffer recording function allows you to check what happened to cause the trigger. The
pre-trigger buffer time range is from 1 sec. to 3 sec. Select
Upload for __ sec
to set the recording duration (1
sec. to 99999 sec.) after an alarm is triggered. Select
Upload while the trigger is active
to record the triggered
video until the trigger is off.
Note:
Make sure that local recording (with SD card) or remote recording (with NAS) is activated so that this
function can be implemented. See section 3.2.10
for more details.
PTZ Function
Assign a camera function: Preset, Sequence, Autopan or Cruise, and specify a Function Line for the camera to
perform when an alarm is triggered.
Note:
See sections 3.5.1 to 3.5.4 for more details on Preset Point, Cruise Line, Autopan Path and Sequence Line
set-ups.
If the selected function is
Preset
, you need to enter the dwell time (1 sec. to 256 sec.) in the corresponding field.
When the alarm is triggered, the camera will go to the selected Preset Point and stay there for a user-defined
period of time. As for other function modes, the camera will keep executing the specified function; to stop it,
simply change the camera’s status.
Note:
The dwell time is only adjustable when Preset is selected. When the dwell time is up, the camera will go
back to its trigger position and recheck the alarm pin status.
File Name
Enter a file name in the
File name
field, e.g. image.jpg, and select the desired file name format of the uploaded
image:
Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
Add sequence number suffix up to # and then start over
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the number you set here. For example, if you set it to “10”, the file name will
start from 00, end at 10, and then start all over again.
Overwrite
The original image at the FTP site will be overwritten by the newly uploaded file with a static filename.
Save
Click the
Save
button to confirm the settings.
3.2.8.2 Motion detection
The Motion Detection function allows the camera to detect suspicious motion and trigger alarms by comparing
sampling pixels in the detection area of two consecutive live images. When the motion volume in the detected area
reaches or exceeds the set sensitivity threshold value, the alarm will be triggered.
The function supports up to 4 sets of Motion Detection settings. Settings can be chosen from the Motion Detection
drop-down menu.
Summary of Contents for 9x0 Series
