1. Handling the system
Please read the following instructions carefully to avoid
faulty operation.
1.1 Controlling the system with the remote key fob
The “Lock” button arms the system.
Only possible with the vehicle doors closed.
The vehicle indicators flash once or twice (depending on the vehicle type),
the interior beeper sounds once and the status LED starts to flash.
If the interior beeper makes a series of beeps when
locking the vehicle, one or more wireless contacts are
open but the system still arms itself
(see 1.4 ventilation function).
The “Unlock” button disarms the system.
The vehicle indicators flash once or twice (depending on the vehicle type),
the interior beeper sounds twice and the status LED stops flashing.
1.2 Controlling the system using a wireless remote control
Any button arms the system.
The vehicle indicators flash once, the interior beeper sounds (depending on button)
once and the status LED starts to flash.
The circuit will still be armed even if the original vehicle doors are open.
Any button disarms the system.
The vehicle indicators flash twice, the interior beeper sounds (depending on button)
twice and the status LED stops flashing.
1.3 Activating the panic alarm
If you feel threatened while you are in the vehicle, use the panic alarm function
to draw attention. With a panic alarm, the siren, indicators and horn are activated
depending on the type of vehicle.
If a Pro-finder is connected, an emergency SMS with the last known position
will be sent to all destination numbers. A panic alarm can be activated with the
system armed or disarmed.
The panic alarm is activated by pressing both buttons on the wireless remote control
simultaneously.
The panic alarm is deactivated by pressing any button on the wireless remote control.
WiPro III Operating Instructions
Page 1
GB
Summary of Contents for WiPro III
Page 65: ...Notes...
Page 66: ...Notes...
