Rear Panel of Audio Matrix
1.
Ethernet Control Connector
-
Through this port, you can connect this unit to PC, ethernet, internet or other control system. And setup the
matrix for system application, monitoring, remote control and so on.
Note: for the detail control command, please contact your supplier.
2.
Firmware
Upgrade Port
3.
Control
output
port
-
This
port
use
to
connect the power sequencer, amplifier detector or other equipment which can be controlled.
4.
Micro
SD2
(
TF2
)
card slot
-
Max 32G, MP3 support any sampling rate Layer3 audio decoding. Micro SD2:
for
internal fire Pre-recorded
message.
Support
FAT16
and
FAT32
file
system.
5.
Remote
Microphone
Station
Input
Port
-Up
to
8 pcs remote
microphone
station
can
be
connected
to
this
matrix
. All the 8 remote microphone can be
set as emergency paging microphone or business broadcast microphone.
The priority is EM>RM
, when the system has two or more EM or RM,
the priority will be sequence by the port
number: Port1>2>3>4>5>6>7>8.
6.
Link In and Link Out Port
-
Using
those two port to link in and link out the master and slaver matrix, Max 32 pcs audio matrix controller
can be linked and up to 256 zones can be supported.
7.
External
Timer Contact Input Port
-
Using
this
port to connect the external timer contact out and open above external timer audio signal.
8.
External Timer Audio Signal Input Port
-
Using
this
port
to
connect
the
external
timer
audio
signal
.
-Through this prot, you can update the flash firmware to newest function and debug the program.
1 2 3 4
5
6
7
8
9
10 11 12
13
14
15
16
17
18
19
20
21
Page 5
Version A
www.thinuna.com
Audio Matrix Part
