ThinkPad Yoga 14 Hardware Maintenance Manual Download Page 66

Page: 66 / 102

Before servicing the computer

Carefully read this topic before servicing the computer.

Disabling the built-in battery

Before replacing any FRU, ensure that you have disabled the built-in battery by doing the following:

1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.

2. Turn on your computer. Press F1 to enter ThinkPad Setup when the ThinkPad logo is displayed.

3. Select

Config

➙

Power

. The

Power

submenu is displayed.

4. Select

Disable built-in battery

5. Click

Yes

in the Setup Warning window. Then the computer turns off automatically. Wait three to

five minutes to let the computer cool.

1010 Lenovo-OneLink-connector cover

Removal steps of the Lenovo-OneLink-connector cover

Note:

Ensure that you reattach the Lenovo-OneLink-connector cover to the Lenovo OneLink connector after

finishing the servicing.

Hardware Maintenance Manual

Summary of Contents for Yoga 14







































































































Search results

Summary of Contents for Yoga 14

Reviews:

Related manuals for Yoga 14

Brands by name

Popular brands

ThinkPad Yoga 14, Hardware Maintenance Manual

Search results

Summary of Contents for Yoga 14

Reviews:

Related manuals for Yoga 14

Brands by name

Popular brands