Thinklogical Virtuoso-PRO, Product Manual

Page: 6 / 18

®
Virtuoso-PRO Audio Extenders, Revision A 6 March 2012
3.1.3 Receiver
The Receiver module connects to the audio output device(s) through copper cables. The connections
for the Q-Series Receiver Modules can be viewed in detail on page 8.
3.1.4 Transceiver
A Transceiver module combines one fully functional Transmitter and one fully functional Receiver in a
single module. Connector configurations are the same as for the Transmit and Receive modules.
4. The Q-Series Virtuoso-PRO Tx and Rx Modules
Q-Series Virtuoso-PRO Tx, Rx and TR modules include the following features:
Balanced Audio Models
Transmitter AQM-B00002-LCTX Receiver AQM-B00002-LCRX Transceiver AQM-B00002-LCTR
Unbalanced Audio Models
Transmitter AQM-000002-LCTX Receiver AQM-000002-LCRX Transceiver AQM-000002-LCTR

Supports balanced AES3-id (2), S/PDIF (2 optical, 2 phono) and balanced or unbalanced analog (2)

Extends up to 4 channels of audio over one fiber and up to 8 channels over 2 fibers

Signal transmission up to 40 kilometers via fiber optic cable; no RF interference

Compact stand-alone unit houses one Tx or one Rx module

Meets audio requirements for both broadcast and post-production environments

32-192 kHz sampling rate

Simple plug and play

Compatible with Thinklogical’s Video and KVM Extension Systems and the VX and HDX Routers
Additional Features when used with the Q-4300 Chassis:
Four Virtuoso-PRO Receiver Modules in a Q-4300 Chassis

Houses up to 4 hot-swappable modules ( can mix both audio and video modules in one chassis )

Dual, current-sharing, hot-swappable power supplies

Front panel status monitoring and control