Thinklogical DCS StudioPRO, Product Manual

Page: 17 / 28

MAN-000018 11 REVISION A
3.3.4. USB Type B – Transmitter
Connect your PC to the location on the Transmitter unit using the USB Type A to USB Type B Cable
(CBL000015-006FR) that was provided with your SPE system.
Figure 7: USB Type B Connector
3.3.5. USB Type A – Receiver
Connect up to four devices(s) into any of the device port(s) on the Receiver unit. The cable that was
provided with your USB device should be able to connect to the USB Type A ports on the Receiver.
Figure 8: USB Type A Connector
3.3.6. AC Power Supply – PWR-000022-R (Quantity 2)
Separate wall-pack AC/DC adapters (part number PWR-000022) are included. A single power jack
accepts the 5VDC input. The green power LED on the front of the units will light when the unit is
receiving power.

Universal Input: 90 – 264 VAC

Continuous Short Circuit Protection

Over Voltage Protection

Conductive EMI Meets CISPR/FCC Class B

High Efficiency, 75% Typical

AC Plug Can Be Changed
Figure 9: AC Power Supply (PN: PWR-000022-R)
shown with optional AC plugs