9
*Notes:
If a random ID is entered, please perform the TPMS Relearn function after programming is finished. If
the original ID is entered, there is no need to perform Relearn function.
If a vehicle does not support Learn function, please select the Manual option to enter the original sensor
ID manually, or trigger the original sensor at the activation screen to get its information, before program-
ming the THINKCAR-sensor.
Method 1 - Static Learning
Method 2 - Self-Learning
Method 3 - Relearn by OBD
3. TPMS Relearn
This function is used to write the newly programmed sensor IDs into the vehicle’s ECU
for sensor recognition.
Relearn operation applies only when the newly programmed sensor IDs are different
from the original sensor IDs stored in the vehicle’s ECU.
There are three ways available for Relearn: Static Learning, Self-Learning and Relearn
by OBD.
Static learning requires the vehicle to be put into learning / retraining mode, and then
follow the on-screen prompts to complete it.
For some vehicles, the learning function can be completed by driving. Refer to the
on-screen learning steps to do the operation.
This function allows the diagnostic tool to write the sensor IDs to the TPMS module.
To perform relearn by OBD, firstly activate all sensors, and then use the diagnostic tool
together with the included VCI to complete the learning steps following the on-screen
instructions.
8
This function allows users to write in the retrieved original sensor data to the THINK-
CAR-sensor. It is used after the original sensor is triggered.
1.From the activation screen, select the specific wheel position and trigger the original
sensor. After the information is retrieved, it will be displayed on the screen.
2.Place a THINKCAR-sensor close to the TPMS antenna of the THINKCAR, and tap
Replication (Copy by activation).
3.Tap Programme to write in the copied sensor data to the THINKCAR-sensor.
*Note: Once programmed with Replication, the THINKCAR-sensor can be installed in the wheel directly
to be mounted on the vehicle and the TPMS warning light will turn off.
Method 3 - Copy By Activation
