
Safety Precautions
FCC
Statement
Read all safety warnings and instructions. Failure to heed these warnings and instruc-
tions may result in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.
There are no user serviceable parts. Have the device serviced by a qualified repair
person using only identical replacement parts. This will ensure that the safety of the
device is maintained. Disassembling the device will void the warranty right.
CAUTION:
This
device
contains
an
internal
Lithium
Polymer
battery. The
battery
can
burst
or
explode,
releasing
hazardous
chemicals.
To reduce
the
risk
of
fire
or
burns,
do
not
disassemble,
crush,
pierce
or dispose
of
the
battery
in
fire
or
water.
This
product
is
not
a
toy.
Do
not
allow
children
to
play
with
or
near
this item.
Do not expose the
device
to
rain
or
wet
conditions.
Do
not
place
the
device
on
any
unstable
surface.
Never
leave
the
device
unattended
during
charging
process.
The device
must
be
placed
on
a
nonflammable
surface
during
charging.
Handle
the
devicewith
care.
If
the
device
is
dropped,
check
for breakage
and
any
other
conditions
that
my
affect
its
operation.
Put
blocks
in
front
of
the
drive
wheels
and
never
leave
the
vehicle unattended
while
testing.
Do
not
operate
the
tool
in
explosive
atmospheres,
such
as
in
the presence
of
flamma-
ble
liquids,
gases,
or
heavy
dust.
Keep
the
device
dry, clean,
free
from
oil,
water or
grease.
Use a
mild detergent
on
a
clean
cloth
to
clean
the
outside
of
the
device
when necessary.
People
with
pacemakers
should
consult
their
physician(s)
before use.
Electroma netic
fields
in
close
proximity
to
heart
pacemaker could
cause
pacemaker
interference
or
pacemaker
failure.
Use
the
device
only
with
the
THINKCAR specific
diagnostic
tool
that comes
loaded
with
the
TPMS
module.
Do
not
install
programmed
TPMS
sensors
in
damaged
wheels.
While
programming
a
sensor,
do
not
place
the
device
close
to
several
sensors at
the
same
time,
or
the
diagnostic
tool
will
detect
more sensors,
which
may
result
in
programming
failure.
The
warnings,
precautions,
and
instructions
discussed
in
this instruction
manual
cannot
cover
all
possible
conditions
and situatins
that
may
occur.
It
must
be
under-
stood
by
the
operator
that common
sense
and
caution
are
factors
which
cannot
be
built
into
this product,
but
must
be
supplied, by
the
operator.
FCC Requirement
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
dital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installaton. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiv-
er is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance
of 20cm between the radiator & your body. This transmitter must not be colocated or
operating in conjunction with any other antenna or transmitter.