STORMBEE Software User Manual
–
Think 3D BVBA
Version N°1.1, last modified 30/09/2018
66
9.
Repeat steps 6 to 8 for other cross-sections with other flight (segments). You can press the reset
button in the cross-section properties window if this helps to make a new cross-section slice. The
goal is to compare each flight (segment) to another at least once. Y
ou don’t need to compare one
-
on-one. If the cross-section you choose contains three or more(different coloured) segments, you
save time, so if possible choose these kinds of cross-sections. Other examples of the same point
cloud data set are shown in Figure 5.17, Figure 5.18 and Figure 5.19 where the synchronisation of
the two flight (segment) is now only a few centimetres off. The synchronisation quality and also
point cloud data quality can vary locally within a data set depending on the flight parameters,
weather conditions, scanner settings and scanning flight path and distance between the
STORMBEE and the object which is scanned.
Figure 5.17 CloudCompare point cloud cross-section narrow slice (example 2)