STORMBEE Software User Manual
–
Think 3D BVBA
Version N°1.1, last modified 30/09/2018
20
Figure 3.17 Applanix data base import single base
5.
The window will now list all possible base stations (Figure 3.18).
The “Smart
Select
” command will
choose the closest one to your mission site and download its data. Optionally, you could select
another desired base station
and press “Download and Import”
if you want. Applanix will then
download the data and import it. Once complete
, press “Close”.
Note: It is sometimes possible that when trying to download and import a base station it gives a
status error “File not found”. This might be due to maintenance of that station at the time of the
mission or that the base station data was not published that period. The only solution is to choose
the next closest base station and try again.
The “Smart Select” command will keep trying to find
suitable base stations until it has a validated base station. Typically, the quality of the solution will
degrade with an increase in distance between rover and base. For this reason POSPac will always
order the base stations with respect to their proximity to your mission location. POSPac sets an
automatic limit of 200km from the rover to potential base stations, but it is best to keep it below
50km.