ThingMagic Mercury xPRESS, Platform Manual, Page: 98 / 146

A D I V I S I O N O F T R I M B L E
98
Using the Developer Toolkit
Š
When server is running, a dashboard like this one will be displayed. The GDB
indicator will be red until the debugger is launched.
Preparing the xPRESS motherboard
It is always a good idea to erase the memory on the xPRESS motherboard before running
a new application (this is required if loading the new application via J-TAG). The steps are
as follows.
1.
Remove any power source to the xPRESS motherboard, including the AC Adapter
and USB cables. If you have connected a Li-ion battery to the two or three pin
interfaces, or have installed a coin cell battery (shown below) in the round socket,
remove them as well.