ThingMagic Mercury xPRESS, Platform Manual, Page: 91 / 146

A D I V I S I O N O F T R I M B L E
Using the Developer Toolkit
91
Errors occurred during the build.
Errors running builder 'Integrated External Tool Builder' on project 'Sam3S-EK
xPRESS Demo App'.
Variable references empty selection: ${project_loc}
This just means that the project wasn’t selected in the Project Explorer when the build started.
This can happen if you’re merely focused on another Eclipse window, such as if you had double-
clicked
Console
, then started a build by pressing
Ctrl+B
.
To fix
empty selection: ${project_loc}
, just click any part of the project in
Project Explorer
and
start the build again.
Common Error 2
If you see
Error 0x80010135: Path too long
, move your project directory higher up the directory
hierarchy so its internal path names won’t be as long. (See also http://support.microsoft.com/kb/
320081 (via http://social.technet.microsoft.com/Forums/windows/en-US/7311832b-6d85-43a4-
a305-8ec676f4fb51/problem-with-long-path-names))
Installing JTAG ICE and J-LINK GDB Server
Obtaining a JTAG ICE
For developers without SAM3 JTAG capabilities, we recommend the purchase of a SAM-ICE
from Atmel. (These instructions assume this is what you are using.)
http://www.atmel.com/tools/ATMELSAM-ICE.aspx
You will need a separate JTAG adapter to go from the Cortex 10-pin connector to the 20 pin
JTAG connector, which can be purchased here:
http://microcontrollershop.com/