ThingMagic Mercury xPRESS, Platform Manual, Page: 49 / 146

WiFi Module
A D I V I S I O N O F T R I M B L E
Using the Optional Modules
49
AP
Configuration
WIFLY_WLAN_SSID "Tenda"
WIFLY_WLAN_AUTH WIFLY_AUTH_MODE_WPA2PSK
WIFLY_WLAN_PASSPHRASE
"Qss rfid@14" Required for Auth type = WPA
WIFLY_WLAN_WEP_KEY_NUMBE
R
1 Required for Auth type = WEP
WIFLY_WLAN_WEP_KEY "112233445566778899AABBCCDD" Required for Auth type = WEP
DHCP Mode WIFLY_DHCP_MODE WIFLY_DHCP_ON if set to WIFLY_DHCP_ON , need to get
xPRESS module IP from the debug
console logs.
Static IP
(xPRESS)
WIFLY_MODULE_IP_ADDRESS "192.168.0.100" Required if WIFLY_DHP_OFF
WIFLY_LOCAL_PORT_NUMBER 49152 since this port number may increment at
run time, see debug logs.
The best practice is to use port number
within the range assigned for "Dynamic,
private or ephemeral ports". http://
en.wikipedia.org/wiki/Well-
known_ports#Dynamic.2C_private_or_e
phemeral_ports
WIFLY_SUBNET_MASK "255.255.255.0" Required if WIFLY_DHCP_OFF
WIFLY_GATEWAY_ADDRESS
"192.168.0.1" Required if WIFLY_DHCP_OFF
Host
Configuration
WIFLY_REMOTE_HOST_IP_ADDR
ESS
"192.168.0.121" Modify to use your host where TCP
server/client or UDP server is running
WIFLY_REMOTE_HOST_PORT_N
UMBER
60001 Modify to use your host where TCP
server/client or UDP server is running.
The best practice is to use port number
within the range assigned for "Dynamic,
private or ephemeral ports". http://
en.wikipedia.org/wiki/Well-
known_ports#Dynamic.2C_private_or_e
phemeral_port
s
TCP server
and client
WIFLY_IP_MODE WIFLY_TCP_SERVER_CLIENT
change to
WIFLY_TCP_SERVER_CLIENT
TCP client
only
WIFLY_IP_MODE WIFLY_TCP_SERVER_CLIENT change to
WIFLY_TCP_SERVER_CLIENT or
WIFLY_TCP_CLIENT
UDP client
WIFLY_IP_MODE WIFLY_TCP_SERVER_CLIENT change to WIFLY_UDP