Networking the Reader
M6 and Astra-EX User Guide
35
C
A
U
T
I
O
N
!
!
!
Its is not advisable to configure both interfaces to fallback to the other
physical interface. If neither is able to connect it will continue to “ping
pong” back and forth between the two interfaces. One of the two should
always fallback to a known static configuration.
C
A
U
T
I
O
N
!
!
!
When setting up and testing the Wireless interface as the primary inter-
face it is strongly advisable to configure it to fallback to the wired inter-
face and the wired falling back to a static wired IP address. This will
make it easier to recover if the wireless configuration is not done cor-
rectly.
Summary of Contents for Astra-EX
