6/13
THAN0186_Rev.1.
1
0_E
Copyright(C) 2015 THine Electronics, Inc.
THine Electronics, Inc.
Security
E
8. Shake Hand Mode
When you use this evaluation kit in “Shake Hand Mode”, Please mount following resistors to connect LOCKN
signal between transmitter and receiver.
*LOCKN signals doesn’t have the connection from / to SMA connector.
Table 4 Resistor Setting for Shake Hand Mode
Connector
Eva Board
Mount
1mm Pitch Connector Using Case
THEVA213-V3
R3
THEVA214-V3
R25
0.5mm Pitch Connector Using Case
THEVA213-V3
R10
THEVA214-V3
R47
(a)THEVA213-V3 (Top Side)
(b)THEVA214-V3 (Top Side)
Figure 12 LOCKN Connection (1mm Pitch Connector)
(a) THEVA213-V3 (Bottom Side)
(b) THEVA214-V3 (Bottom Side)
Figure 13 LOCKN Connection (0.5mm Pitch Connector)
INIT(LOCKN)
Input
R3:Mount(0 )
R25:Mount(0 )
LOCKN Output
