5/13
THAN0186_Rev.1.
1
0_E
Copyright(C) 2015 THine Electronics, Inc.
THine Electronics, Inc.
Security
E
6. Function Setting
Setting pin of each board is shown in yellow area of Figure 9. Pin#2 of each 3HEADER is connected to IC’s
setting pin.
Each setting pin’s high or low setting can set by connecting pin#2 of 3HEADER and high level or low level.
Figure 9 Position of Function Setting Pin
(a)3HEADER Description
(b)High Level Setting
(c)Low Level Setting
Figure 10 High / Low Setting Description
7. Clock Input from SMA Connector
THEVA213-V3 can also choose the TTL clock input from SMA connector by using 0ohm resistor.
If you want to use SMA connector for clock input, please change the 0ohm resistor mount from R15 to R18.
Figure 11 TTL Clock Input Connector Select
Setting pin
Setting pin
